008啫喱漿 噴霧啫喱水和特硬發膠漿理想材料 廠家自產自銷
008啫喱漿
是采用丙烯酸酯為主要原料聚合而成。是屬於陰離子型樹脂,有較高的玻璃化溫度。
外觀: 無色或淺黃色粘稠液體
PH值(1%水溶液): 2-7
固含量(%): ≥45
粘度(25℃mpa.s): ≥8000
遊離單體(%): 0.1
包裝規格(kg/桶): 60kg/桶
產品特性及應用:
本產品的附著力優良,霧化性能好,成膜性均勻,亮度和硬度較高,是噴霧啫喱水和特硬發膠的理想材料。建議用量為10%。
008 SCULPTING PLASM
008 sculpting plasm is specially formed with acrylic acid ester as major
material,which is belong to anion type resin and featured by relative
high vitrification temperature.
Appearance : colorless or buff glutinous liquid.
Ph value(aqueous solution of 1%): 2-7
Solid constituent content(%): ≥45
Adhesive viscosity(25℃mpa.s): ≥8000
Dissociated monomer(%): 0.1
Packing specification(kg/barrel): 60kg/barrel
Product Characteristics and Application:
This product is featured by favorable properties of adhesive strength,good atomization,even filmforming superior brightness and rigity,which is a kind of ideal material for spray suclpting water and especially stiff fixature.Dosage is suggested to be 10%.
歡迎谘詢。可聯系QQ3122191097。
是采用丙烯酸酯為主要原料聚合而成。是屬於陰離子型樹脂,有較高的玻璃化溫度。
外觀: 無色或淺黃色粘稠液體
PH值(1%水溶液): 2-7
固含量(%): ≥45
粘度(25℃mpa.s): ≥8000
遊離單體(%): 0.1
包裝規格(kg/桶): 60kg/桶
產品特性及應用:
本產品的附著力優良,霧化性能好,成膜性均勻,亮度和硬度較高,是噴霧啫喱水和特硬發膠的理想材料。建議用量為10%。
008 SCULPTING PLASM
008 sculpting plasm is specially formed with acrylic acid ester as major
material,which is belong to anion type resin and featured by relative
high vitrification temperature.
Appearance : colorless or buff glutinous liquid.
Ph value(aqueous solution of 1%): 2-7
Solid constituent content(%): ≥45
Adhesive viscosity(25℃mpa.s): ≥8000
Dissociated monomer(%): 0.1
Packing specification(kg/barrel): 60kg/barrel
Product Characteristics and Application:
This product is featured by favorable properties of adhesive strength,good atomization,even filmforming superior brightness and rigity,which is a kind of ideal material for spray suclpting water and especially stiff fixature.Dosage is suggested to be 10%.
歡迎谘詢。可聯系QQ3122191097。